Add: 280 Khuong Dinh - Thanh Xuan - Ha Noi
- Viet Nam
Branch: 126 Nguyen Van Linh - Thanh Khe - Đa Nang
Phone: (04) 3 999 8737 - Hotline:
0936 46 8389
Website:
floorseal.vn - floorsealhainam.com
TECHNICAL DOCUMENTATION
I/
Product description
FloorSeal is
a VOC free, environmentally friendly water based silicate concrete floor
hardener. This product is designed for treatment of uncovered concrete
floor surfaces that will be exposed to medium to high volume of rubber wheeled
and pedestrian traffic. The floors is after applied FloorSeal it’s
penetrates deeply into the surface pores of concrete, reacts with the free
lime, to produce water insoluble crystallization gel, that gel fills the
pores of concrete to density, harden, dustproof and sealed the surface against
petroleum, dirt, water and other mild contaminants.
1. Application
areas
FloorSeal is
recommended to uses on industries and commercial, new or existing concrete floor:
-
Supermarket; Distribution centers;
Showroom; Car parks; Warehouses; Factories; Automotive service areas.
-
Workshop; Grocery stores; Bakeries;
Shopping malls; Stadiums; Pharmaceutical plants; Textile plants.
-
Food processing plants; Dairies;
Breweries; Canning factories; Restaurants; Coffee shop; School yards;
Mechanical room.
2. Features & benefits
- VOC
free, environment friendly.
- Increases
concrete compressive strength.
- Increases
concrete surfaces abrasion, impact strength and wear resistance.
- Dust
proof for concrete surfaces.
- Increases
densities of concrete surfaces.
- Reduces
dirt binding and easier cleaning.
- Long
lasting shining with polishing application.
- Low
maintenance cost.
3. Technical
specification
- Material
based: Modified silicate solution.
- Appearance:
transparent liquid.
- Odor:
Odorless.
- Specific
gravity: 1.10 – 1.20 kg/liter.
- Application
temperature: from 50C to 350C.
- Packaging:
25 liter pail.
- Shelf
life: minimum 24 months from MFG date.
- Storage:
keep in dry conditions at a temperature of 5oC to 45oC.
- Flammability:
Nonflammable product.
- Coverage
rate: 4m2 – 5m2/ liter, depending on the surfaces
porosity.
-
Abrasion resistance: ASTM C779 –
increase 30%.
-
Impact resistance: ASTM C805 – increases
> 13%.
- Compressive
strength: ASTM C39 – increase 25 - 30% after 3 days application.
- Aging:
ASTM G23 – UV and water do not affect to the applied surfaces of FloorSeal.
II/
Application Instructions
1. Surfaces
preparation
·
Existing cured concrete:
- The
concrete must be clean, free of dust and free from oil, grease and paint.
-
Remove all contaminants and laitance
from the concrete surfaces to assure maximum penetration. Cracks and holes
should be repaired using Surfix
repair mortar system.
·
New concrete:
- The
new concrete must be cured at least 72 hours. Remove any curing membrane or
coating which may prevent FloorSeal from penetration. For best results FloorSeal
should be used on concrete in seven days cured.
2. Application
- Apply
one saturating coat of FloorSeal by spraying, rolling uniformly on
concrete floor. The floor will absorb the solution within 1 hour. Apply the
second when the surface completely absorbs the first coat. After the second coat
has been dried, wash off with clean water and remove any residue and dried
powder of FloorSeal on the surface by cleaning machine. Failure to carry
out the washing off stage may result in a surface sheen which can abrade
during service and may be slippery in wet conditions.
3. Polished concrete floor:
-
Waiting for FloorSeal dries
within 1 to 2 days. Use the professional floor polished machine; polish the
floor with polish pad from 50 levels to 3000 levels.
- Note:
after the floor is completely polished, wash with water and clean with vacuum
cleaner.
v Limitation:
- Only
apply when the concrete temperatures are 5oC and rising.
- New
concrete must finish with power trowel.
v Health
and safety
FloorSeal
is
alkaline and should not come into contact with skin or eyes. Avoid inhalation
of any air born spray. Safety glasses, gloves and rubber boots should be
worn. If contact with skin occurs wash off with clean water. If splashes to
eyes occur wash immediately with plenty of clean water and seek medical advice.
Full health and safety data are given in Material Safety Data Sheet.
III/ APPLICATION AREAS
For more information, please contact: 0949.712.638
 |
| Floorseal Hải Nam |
